About the Calculadora de Concreto
Whether you are pouring a backyard patio, a residential driveway, fence post holes, Sonotube columns, or exterior steps, the first question every builder and homeowner asks is: "How much concrete do I need?" Ordering too little ready-mix concrete results in costly cold joints or emergency short-load delivery fees, while over-ordering wastes money and leaves heavy disposal piles. Our professional Concrete Calculator and Concrete Volume Calculator computes exact geometric volume in cubic yards, cubic feet, and cubic meters across five structural profiles—Slabs & Footings, Circular Columns & Post Holes, Hollow Cylinders, Curbs & Gutters, and Stairs. It automatically factors in a customizable waste allowance, calculates exact 80 lb, 60 lb, 50 lb, and 40 lb pre-mixed bag counts, estimates total structural weight, and provides a 1:2:3 dry-mix breakdown (cement, sand, gravel, and water) plus side-by-side cost comparisons.
How to Use This Calculator
- 1Select your structural concrete shape: Slab / Square Footing / Wall, Circular Column / Post Hole, Hollow Cylinder, Curb & Gutter, or Stairs.
- 2Enter your measurements and choose the appropriate unit (Feet, Inches, Yards, Meters, or Centimeters) for each dimension—for example, Length and Width in Feet and Thickness in Inches.
- 3Set the Quantity if you are pouring multiple identical footings, piers, or slabs, and choose a Waste Allowance (5% to 10% is standard to account for subgrade variations).
- 4Review your instant results showing Cubic Yards (for ready-mix truck orders), Cubic Feet, Cubic Meters, and exact pre-mixed bag counts (80 lb, 60 lb, 50 lb, and 40 lb bags).
- 5Optionally add each section to your Project Pour List to combine multiple shapes (such as a patio slab plus 6 deck piers) into a single combined concrete order.
- 6Enter your local price per cubic yard and price per bag in the Cost Estimator to compare whether pre-mixed bags or a ready-mix delivery truck is more economical.
Formula & Calculation Methodology
Worked Example: How Much Concrete Do I Need for a 12 ft × 15 ft Patio Slab (4 Inches Thick)?
Scenario: A homeowner is pouring a rectangular backyard patio measuring 12 feet wide by 15 feet long with a standard 4-inch slab thickness, and wants to include a 10% waste factor for uneven gravel subbase.
Assumptions & Practical Limitations
- Standard normal-weight Portland cement concrete density is calculated at 150 lbs per cubic foot (4,050 lbs per cubic yard, or ~2,400 kg/m³) when wet/cured.
- Pre-mixed dry concrete bag yields follow industry standards (Quikrete / Sakrete ASTM C387): 0.60 ft³ per 80 lb bag, 0.45 ft³ per 60 lb bag, 0.375 ft³ per 50 lb bag, and 0.30 ft³ per 40 lb bag.
- Subgrade excavation is rarely perfectly level; adding a 5% to 10% waste allowance is strongly advised so you do not run short during the pour.
- Nominal 1:2:3 mix-from-scratch estimates (1 part cement, 2 parts sand, 3 parts coarse gravel by volume) account for aggregate void shrinkage where dry bulk components compress by ~35% when mixed with water.
- Structural slabs supporting vehicles (driveways, garage floors, RV pads) generally require a minimum thickness of 5 to 6 inches, 4,000+ PSI mix strength, and steel rebar or wire mesh reinforcement.