MM to Inches Converter

Convert millimeters to inches (mm to inches) instantly in both decimal inches and nearest 1/16″, 1/32″, and 1/64″ tape-measure fractions.

Length · 1 inch = 25.4 mm (Exact)
Inches → CM / MM
mm
Length in Decimal Inches (in)
3.9370 in
Exact Factor:1 in = 25.4 mm
Nearest 1/16″ Tape Measure Fraction
3 ¹⁵⁄₁₆″
Rounding Diff:±0.012 mm
Nearest 1/64″ Machinist Fraction
3 ¹⁵⁄₁₆″
1/32″ Shop Rule:3 ¹⁵⁄₁₆″
Centimeters & Feet / Inches
10 cm
Feet & Inches:0′ 3.94″
Step 1: Divide Millimeters by 25.4 (Exact International Inch Definition)100 mm ÷ 25.4 = 3.937 in
Step 2: Multiply by Reciprocal Factor (1 mm ≈ 0.03937008 in)100 mm × 0.03937008 = 3.937 in
Step 3: Find Nearest 1/16″ Tape Measure / Hardware Fraction3.937 in ≈ 3 ¹⁵⁄₁₆″ (1/64″ precision: 3 ¹⁵⁄₁₆″)
Millimeters (mm)Decimal Inches (in)Nearest 1/16″ FractionCentimeters (cm)
1 mm0.0394 in¹⁄₁₆″0.1 cm
2 mm0.0787 in¹⁄₁₆″0.2 cm
3 mm0.1181 in¹⁄₈″0.3 cm
4 mm0.1575 in³⁄₁₆″0.4 cm
5 mm0.1969 in³⁄₁₆″0.5 cm
6 mm0.2362 in¹⁄₄″0.6 cm
8 mm0.3150 in⁵⁄₁₆″0.8 cm
10 mm0.3937 in³⁄₈″1 cm
12 mm0.4724 in¹⁄₂″1.2 cm
15 mm0.5906 in⁹⁄₁₆″1.5 cm
20 mm0.7874 in¹³⁄₁₆″2 cm
25 mm0.9843 in1″2.5 cm
25.4 mm1.0000 in1″2.54 cm
30 mm1.1811 in1 ³⁄₁₆″3 cm
40 mm1.5748 in1 ⁹⁄₁₆″4 cm
50 mm1.9685 in1 ¹⁵⁄₁₆″5 cm
75 mm2.9528 in2 ¹⁵⁄₁₆″7.5 cm
100 mm3.9370 in3 ¹⁵⁄₁₆″10 cm
150 mm5.9055 in5 ⁷⁄₈″15 cm
200 mm7.8740 in7 ⁷⁄₈″20 cm
300 mm11.8110 in11 ¹³⁄₁₆″30 cm
500 mm19.6850 in19 ¹¹⁄₁₆″50 cm
1000 mm39.3701 in39 ³⁄₈″100 cm

About the MM to Inches Converter

The **MM to Inches Converter** lets you accurately convert **mm to inches** (**millimeters to inches**) in both **decimal inches** and **fractional ruler inches** ($\text{1/16″}$, $\text{1/32″}$, and $\text{1/64″}$). Whether you are matching metric wrench sockets and drill bits to SAE hardware, reading CNC engineering blueprints, sizing 3D-printed components, or measuring jewelry and watch bands, converting **mm to inch** with fractional precision saves time at the workbench. Under the 1959 International Yard and Pound Agreement, **1 inch is defined as exactly 25.4 millimeters** ($1\text{ in} = 25.4\text{ mm}$). Therefore, **1 millimeter equals $\frac{1}{25.4}\text{ inches} \approx 0.03937007874\text{ inches}$**. Enter any millimeter dimension above to **convert mm to inches** and see the exact closest mark on a standard imperial tape measure or machinist ruler.

How to Use This Calculator

  1. 1Enter your measurement in the **Millimeters (mm)** field to **convert mm to inches** immediately.
  2. 2Read the primary result in **Decimal Inches (in)** and use the **Precision** selector to show 2, 3, 4, or 6 decimal places.
  3. 3Check the **Fractional Inch (Tape Measure / Shop Ruler)** cards showing the closest 1/16″, 1/32″, and 1/64″ fraction along with the rounding difference in millimeters.
  4. 4Use the **Quick Reference MM to Inches Table** below the converter to compare common metric fastener and drill sizes (1 mm to 1,000 mm).

Formula & Calculation Methodology

### Official MM to Inches Formula Because **1 international inch equals exactly 25.4 millimeters**, to **convert mm to inches**, divide the length in millimeters by **25.4**: $$\text{Inches (in)} = \frac{\text{Millimeters (mm)}}{25.4}$$ Equivalently, you can multiply millimeters by the reciprocal conversion factor **$0.03937007874$**: $$\text{Inches (in)} = \text{Millimeters (mm)} \times 0.03937007874$$ ### How to Convert Decimal Inches to a Ruler Fraction (1/16″, 1/32″, 1/64″) Standard US tape measures are graduated in **sixteenths of an inch ($\text{1/16″}$)**, while precision machinist rules use **thirty-seconds ($\text{1/32″}$)** or **sixty-fourths ($\text{1/64″}$)**: 1. Multiply the decimal inch value by your desired denominator ($16$, $32$, or $64$) and round to the nearest whole number. 2. Place that rounded integer over the denominator and reduce the fraction by dividing numerator and denominator by their Greatest Common Factor (GCF).

Worked Example: Converting a 10 mm Metric Socket Wrench to Decimal and Fractional Inches

Scenario: A mechanic needs to find how many inches correspond to a 10 mm bolt head and determine the closest standard fractional inch socket size (to the nearest 1/16″ and 1/32″).

Step 1: Divide Millimeters by 25.4: 10 mm ÷ 25.4
0.3937 in
Step 2: Find Nearest 1/16″ Fraction: 0.3937 × 16 = 6.299 → rounds to 6/16 = 3/8″ (0.3750 in)
3/8″ (differs by 0.475 mm)
Step 3: Find Nearest 1/32″ Precision Fraction: 0.3937 × 32 = 12.598 → rounds to 13/32″ (0.40625 in)
13/32″ (differs by 0.319 mm)
Conclusion: 10 mm equals 0.3937 inches, which sits between 3/8″ (9.525 mm) and 13/32″ (10.319 mm) on a standard fractional tool scale.

Assumptions & Practical Limitations

  • Conversions are based on the exact international definition 1 inch = 25.4 mm adopted by NIST, ISO, and BSI.
  • Fractional inch approximations (1/16″, 1/32″, 1/64″) display the closest standard ruler graduation along with the exact millimeter deviation so machinists know whether a fractional tool will fit within tolerance.

Frequently Asked Questions

To convert mm to inches, divide the millimeter value by 25.4 (or multiply by 0.03937008). For example, 50 mm ÷ 25.4 = 1.9685 inches.

References & Standards: