Traducteur Code Morse

Instantly encode plain text into International Morse Code or decode dots and dashes back into English text with CW audio playback, phonetic rhythms, and timing analysis.

Speed:
Word Gap:
Chars: 10Words: 2
Standard: ITU-R M.1677-1
Morse Code Output
.... . .-.. .-.. --- / .-- --- .-. .-.. -..
Dits (·): 19Dahs (−): 13Units: 111
Tx Time: 6.66 s
Presets:
Spoken Phonetic Rhythm (dit / dah)
di-di-di-dit dit di-dah-di-dit di-dah-di-dit dah-dah-dah / di-dah-dah dah-dah-dah di-dah-dit di-dah-di-dit dah-di-dit
ITU Timing @ 20 WPM (PARIS Standard)6.66 s total
Dot: 60 ms · Dash: 180 ms · Word gap: 420 ms
#CharacterMorse CodeSpoken PhoneticNATO / DescriptionITU Units
1H....di-di-di-ditHotel7 u
2E.ditEcho1 u
3L.-..di-dah-di-ditLima9 u
4L.-..di-dah-di-ditLima9 u
5O---dah-dah-dahOscar11 u
6[Space]//Word Space (7 units)7 u
7W.--di-dah-dahWhiskey9 u
8O---dah-dah-dahOscar11 u
9R.-.di-dah-ditRomeo7 u
10L.-..di-dah-di-ditLima9 u
11D-..dah-di-ditDelta7 u

About the Traducteur Code Morse

The Morse Code Translator is a fast, bidirectional morse translator that acts as both a morse code generator (encoding English letters, numbers, and punctuation into dots and dashes) and a morse code decoder (converting dot-dash sequences back into readable text). Built around the official International Telecommunication Union (ITU-R M.1677-1) standard, it supports all 26 Latin letters (A–Z), numerals (0–9), and 18 common punctuation marks. Whether you are practicing amateur (ham) radio continuous wave (CW) telegraphy, decoding a puzzle, learning emergency signaling such as SOS (... --- ...), or inspecting the exact millisecond timing of a message at a given Words Per Minute (WPM) speed, this morse code translator updates in real time as you type and includes an integrated 600 Hz CW audio tone player.

How to Use This Calculator

  1. 1Choose your translation mode at the top of the Morse Code Translator: select "Text → Morse" to generate Morse signals from text, or "Morse → Text" to translate dots and dashes back into words.
  2. 2In Text → Morse mode, type or paste any message containing letters (A–Z), numbers (0–9), and standard punctuation. Choose your preferred word delimiter (/, |, or triple space).
  3. 3In Morse → Text mode, enter dots (.) and dashes (-) separated by a single space between letters and a slash (/) or two spaces between words—or use the on-screen Morse Keyer buttons.
  4. 4Tap "Play Audio" to hear your morse code synthesized as a 600 Hz continuous-wave (CW) radio tone at your selected speed (10 to 30 WPM), or tap "Copy" to copy the result to your clipboard.
  5. 5Expand the interactive International Morse Code Chart below the converter to browse or tap any letter, number, or punctuation symbol to insert it directly into your message.

Formula & Calculation Methodology

1. International Morse Code Timing Ratios (ITU-R M.1677-1): International Morse code is built from two signal elements—a short mark called a dot (or dit, .) and a longer mark called a dash (or dah, -)—governed by strict relative time units defined by the ITU: • 1 Dot (dit) duration = 1 time unit • 1 Dash (dah) duration = 3 time units (1 : 3 ratio) • Intra-character gap (silence between dots and dashes within the same letter) = 1 time unit • Inter-character gap (silence between letters of the same word) = 3 time units • Inter-word gap (silence between words, represented by /) = 7 time units 2. Converting Words Per Minute (WPM) to Milliseconds: Telegraphy speed in Words Per Minute (WPM) is standardized using the benchmark word PARIS, which requires exactly 50 time units (including its trailing 7-unit word space). Because 1 minute equals 60,000 ms, the duration of a single dot (T_dot) in milliseconds at speed S (in WPM) is: T_dot (ms) = 60,000 ms ÷ (50 × S) = 1,200 ÷ S For example, at S = 20 WPM: • Dot duration (1 unit) = 1,200 ÷ 20 = 60 ms • Dash duration (3 units) = 3 × 60 ms = 180 ms • Letter space (3 units) = 3 × 60 ms = 180 ms • Word space (7 units) = 7 × 60 ms = 420 ms

Worked Example: Encoding "SOS" and "HELLO" in International Morse Code

Scenario: Let us encode the international distress signal "SOS" and the word "HELLO" using the International Morse Code table, then verify their total ITU timing units at 20 WPM.

Step 1: Encode "SOS" Letter by Letter: Combine with single spaces between letters: ... --- ...
... --- ... (Spoken: di-di-dit dah-dah-dah di-di-dit)
Step 2: Calculate ITU Timing Units for "SOS": S (5 u) + gap (3 u) + O (11 u) + gap (3 u) + S (5 u) = 27 units
27 timing units × 60 ms/unit (at 20 WPM) = 1.62 seconds
Step 3: Encode "HELLO" and Decode Back to Text: Join letter codes with spaces: .... . .-.. .-.. ---
.... . .-.. .-.. --- → Decodes back to "HELLO"
Conclusion: Because the most frequent English letters such as E (.) and T (-) are assigned the shortest Morse sequences, natural English text transmits rapidly in International Morse Code.

Assumptions & Practical Limitations

  • Uses the official ITU-R M.1677-1 International Morse Code standard (used worldwide in aviation, maritime, and amateur radio), rather than the historical 19th-century American Railroad Morse code.
  • Morse code is case-insensitive; lowercase and uppercase letters encode to the same dot-dash sequence and decode to uppercase letters.
  • Accented Latin characters (such as é, ñ, ü) are automatically normalized to their base ASCII letter (E, N, U) during encoding so messages remain compatible with standard ITU receivers.

Frequently Asked Questions

Each letter, digit, or punctuation mark is represented by a unique combination of short signals called dots (.) and long signals called dashes (-). When writing Morse code as text, place a single space between individual letters and a forward slash (/) between separate words. For example, "HI THERE" is written as ".... .. / - .... . .-. .".