Dachneigungsrechner – Einfach & Kostenlos Rechnen
Our professional Roof Pitch Calculator and Roof Angle Calculator makes it easy for builders, roofers, architects, and homeowners to accurately determine the steepness, inclination angle, and rafter dimensions of any roof. In construction and architecture, roof pitch describes the steepness of a roof slope as a ratio of vertical rise over a 12-inch horizontal run (e.g., 6:12 or 6/12). Whether calculating from tape-measured rise and run, converting pitch to degrees, checking building code requirements for asphalt shingles, or ordering rafter lumber, this tool delivers instant, bidirectional calculations with an interactive SVG roof diagram.
Bedienung: So nutzen Sie den Taschenrechner Online
- 1Choose your preferred input method: Rise & Run (most common), Pitch (X:12) & Run, Roof Angle (Degrees) & Run, or Rafter Length & Run.
- 2Select your measurement units (Feet, Inches, Centimeters, or Meters).
- 3Enter your known dimensions into the input fields.
- 4Instantly view your calculated Pitch Ratio (X:12), Roof Angle in degrees, Slope Percentage, and true Rafter Length.
- 5Examine the interactive roof diagram to visualize the slope profile, rise/run dimensions, and angle arc in real time.
- 6Check the roof classification badge and recommended roofing materials table to confirm building code compatibility.
Rechenregeln & Mathematische Methodik (Punkt-vor-Strich)
Rechenbeispiel: Calculating Pitch, Angle, and Rafter for a 24-Foot Span House
Szenario: A residential gable roof has a total building span of 24 feet (making the horizontal Run 12 feet) and a measured vertical ridge height (Rise) of 6 feet.
Funktionsumfang & Technische Hinweise
- Calculations assume a uniform, symmetrical right triangle formed by the roof rise, horizontal run, and rafter hypotenuse.
- Horizontal Run is measured from the exterior wall framing plate to the center of the ridge board. For a centered gable roof, Run is half the total building span.
- Rafter length results represent the structural hypotenuse between the wall plate and ridge. Eaves overhang (fascia extension) must be added separately when ordering lumber.
- Building codes (such as the International Residential Code - IRC) stipulate minimum pitch requirements for specific materials: minimum 4:12 for standard asphalt shingles (or 2:12 to 4:12 with double underlayment/ice and water barrier), while slopes under 2:12 require seamless membrane roofing (BUR, TPO, EPDM).